rail PICS We Made

Vance Collins · Guest

I suck at life! Sad

jboss · Kickflip Joined: 22 Jun 2004 Posts: 3210 City: Chalmette

YA DAAAAAAAAAAAAAAAMN RIGHT!!! dolemite style yerd me

Cubby The Shiz · Pop Shuvit Joined: 29 Nov 2003 Posts: 169

well pirate...we put in the rail the other day and yes it did float on its side, just like you said, but that was asctullay to our adavantage and then it only took 2 people on one end to pry it up and then we sat on it while one person went down and dropped sand bags on the bases...it actaully worked really really well and considerably painless....so all in all you were right but....not really....its dank nuggs.....ill get pics up soon

uk wakeskate te05 · Posted: May 30, 2005 5:15 am Post subject:

heres a pic of the rail ive been building, its still not quite finished and ive got no where to put it yet though Rolling Eyes

sim · Pop Shuvit Joined: 10 Dec 2003 Posts: 219 City: Thorpe

looks like i'm a bit late, but what the hell.
first of all, that would definatly float and secondly you've used way more wood than you need. I've done a quick sketch of how we would have built it, trust that will still be strong, lighter and a lot cheaper too. It's like anything, the more you build, the more you learn about what works.
The second picture was a rail we did for the UK Wakestock. It was about 15ft of the water and if you look at the structure, there's less wood on this monster than there is on you flatbar. It was strong as fcuk, so you don't need lot's of wood, just put it in the right place.
peace
________
Vermont marijuana dispensaries

uk wakeskate te05 · Posted: May 30, 2005 6:42 am Post subject:

christian thom of kampus slid that whole a-frame on his skate, only person to do so i think? Smash

minnesotawake · Faceplant Joined: 18 May 2005 Posts: 6

if you are looking for a place to put it try long lake in orono

minnesotawake · Faceplant Joined: 18 May 2005 Posts: 6

if you are looking for a place to put that try long lake

SnoSk8er10 · Posted: May 30, 2005 1:47 pm Post subject:

Cubby The Shiz · Pop Shuvit Joined: 29 Nov 2003 Posts: 169

well we already know where we are goin to have it but if we need some place else then we could go check out long lake......and the rail is in Upper Lake through the narrows going west...you'll see it if you go along the shore a little bit...its ill

Cubby The Shiz · Pop Shuvit Joined: 29 Nov 2003 Posts: 169

we could of used you plan but everthing fell into place perfectyl and we found those frames...overall we payed about 20 bucks and that was for the metal brackets...so we lost pretty much nothing

sim · Pop Shuvit Joined: 10 Dec 2003 Posts: 219 City: Thorpe

good work, and yeah Trigger killed it on that rail, whole thing on his second go.
________
Marijuana Vaporizers