boat wake help?

wakeskatehawaii808 · Ollie Joined: 21 Jul 2007 Posts: 79 City: hilo

I just got a new prostar 190 and the wake is really big and rolly. how can I make the wake more peakier so i can lock on to those lip tricks. its too hard when its one big roller. :roll:

88skisupreme · Backside 180 Joined: 11 Nov 2004 Posts: 1342 City: ATX

are both wakes like that? you might just need to ballance the wieght in the boat. maybe up the speed a little too.

Gnarly Dancer 42 · 360 flip Joined: 21 May 2007 Posts: 5121 City: kalamazoo

i think if you add some fat sacs, and put them in the back of the boat it would probably help

wakeskatehawaii808 · Ollie Joined: 21 Jul 2007 Posts: 79 City: hilo

both sides are rolly. it doesnt come to a peak. im going like 20 to 22mph. i might need to add a sac. what would make vibration when you first get up. impeller shaft bent or something. i just noticed that yeasterday too.

OverEasy · Pop Shuvit Joined: 08 Aug 2005 Posts: 167 City: Richardson

I would try posting your question on wakeboarder.com or wakeworld.com.
Lots of folks with PS 190's on those sites.

mr robotto · Backside 180 Joined: 05 May 2007 Posts: 1052

ya go to wakeworld in boat section...

88skisupreme · Backside 180 Joined: 11 Nov 2004 Posts: 1342 City: ATX

Have the prop and drive shaft allignment checked.

deltarider · Guest

wakeskatehawaii808, first off. You need weight.
I would start by adding to v-drive sacs to the back.
Add a locker sack.
Buy pop-bags, these will fine tune the shape of the wake.

tad · 360 flip Joined: 07 May 2006 Posts: 5031

I like my wake nice and round. Just like my women.

Calskater23 · Backside 180 Joined: 26 Jun 2007 Posts: 1795 City: FRESNO

Just try taking a lot of people out and have them sit in different places on the boat. This will help you determine where you need to put the sacs. Also try different trim settings.

FenderBass37 · Posted: Jul 29, 2007 3:39 pm Post subject:

lol nice TAD, but yeah i had the same problem with my wake and debated getting some fat sacs to even that shizz out, but it turned out the motor was a little too high from our low water level. So yeah, play with the trim setting like Calskater23 suggested

bob. · Posted: Jul 29, 2007 8:49 pm Post subject:

if it has trim tabs, put them up and it peaks the wakes.

jhilly8982 · Faceplant Joined: 20 May 2007 Posts: 31

trim on an inboard?????

unless you are talking about an adjustable wake plate?!

brianl289 · Frontside 180 Joined: 07 Aug 2006 Posts: 310 City: houston

trim tabs, wake plate. all the same

bob. · Posted: Jul 31, 2007 1:03 am Post subject:

you can put trim tabs on an inboard, tabs, not motor trim, or wake plate, just like regular trim tabs, they seem to help shape the wake alot for me.

wakeskatehawaii808 · Ollie Joined: 21 Jul 2007 Posts: 79 City: hilo

dont have those on my prostar