Bi Level Question.

xstfu ill pwn youx · Backside 180 Joined: 17 Nov 2005 Posts: 837 City: 954.

alright.
so my bi level comes in the mail today.
and i grip it
and now its time to put it togehter.
so i get one side on and the other side doesnt match up?
what do i do?

senorbueno · Backside 180 Joined: 28 Sep 2004 Posts: 1593

xstfu ill pwn youx, it's helpful to get a couple of large and long nails and basically place them in the holes on the opposite side of the deck while you're screwing in a screw to keep everything lined up. Mine didn't line up perfectly, but placing the nails in between the hardware and the decks makes screwing them together much easier... let me know if this makes any sense.

xstfu ill pwn youx · Backside 180 Joined: 17 Nov 2005 Posts: 837 City: 954.

nooo like its not me being able to keep it in line. the holes were drilled to short. so im gonna drill them wider

spadedout41 · Frontside 180 Joined: 21 Jul 2005 Posts: 441

sux that you have to drill into a $280 + just to make it the way it should of came ..........

devotid · Frontside 180 Joined: 07 Mar 2005 Posts: 473 City: saginaw

SoFloSkater · Guest

xstfu ill pwn youx, same thing happened to mine

the bottume deck and top deck holes werent allined properly
and i ended up making All of the wholes longer to fit the screw's in

never would have thought that Cassette would
send out defected bi levels Rolling Eyes

xstfu ill pwn youx · Backside 180 Joined: 17 Nov 2005 Posts: 837 City: 954.

i know.
damn

PIRATE · Kickflip Joined: 11 Jul 2006 Posts: 2651

xstfu ill pwn youx, you know its a-symetrical right ?? Make sure you got that shizzle on right.......

Jordan Sprague · Posted: Aug 31, 2006 12:34 pm Post subject:

take it apart and put it back togeather but the best advise i can give you is that to never buy a bi level again they suck ass

chrisd · Pop Shuvit Joined: 23 Aug 2005 Posts: 170

The last thing I would do is drill the holes differantly. The holes are drilled in a jig at the factory so the chances of them being off are pretty high. I think it might be not lining up due to the flex of the top deck. Try e-mailing Cassette or something before you start drilling into it.

I could be wrong though.....