integ rail shaping

mojo · Posted: Oct 19, 2008 11:01 pm Post subject: integ rail shaping

do you sand the rails tip to tail or up and down?

eviltweak · Backside 180 Joined: 11 Jul 2008 Posts: 839 City: Nor Cal

you dont need to shape them

88skisupreme · Backside 180 Joined: 11 Nov 2004 Posts: 1342 City: ATX

What year board is it?

Kay-Kay · Posted: Oct 20, 2008 8:48 am Post subject:

are you sanding it by hand? if you're not using an electric sander i think it would be pretty hard to reshape the rail unless you did it "tip to tail"

cjbecker · Posted: Oct 20, 2008 10:14 am Post subject:

tip to tail

The Bug · Frontside 180 Joined: 16 Sep 2004 Posts: 434 City: Redding

Sand it all the way around until you get to the wood core.

De Oro · Backside 180 Joined: 20 Nov 2007 Posts: 1064 City: Austin

The Bug,

mojo · Posted: Oct 20, 2008 12:20 pm Post subject:

basically i want to shape the center rails b/c i miss my old handgrenade/20 rails. the legacy's stepdown is killer, and i ride it well and will sesh the integ before i make any changes, but i spend alot of time on the lip. should it STAY or would shaping help? i know slingshot wakeboards are shapable but non of their pro's change em. feed it back

cjbecker · Posted: Oct 20, 2008 4:26 pm Post subject:

it more depends on if like your board to ride fast or slow, the way they are now is going to make the board ride the fastest because the board rides on the top of the water. If you round them that will make your board sit lower in the water and make it ride slower. I prefer my boards to ride a fast as possible so i never shape rails. so now you know.

TommyC · Posted: Oct 20, 2008 5:00 pm Post subject:

i think there are directions on the integrity website on how to do this